Showcases
Five projects in the Designer. The catamaran is shown here for now; the other four are yours to open or to download:
- Open in the Designer opens the project on bitbybit.dev. It comes with the geometry its author's Designer kept, so even the jet engine usually opens in seconds, and what you change is kept as your own copy. Below Gold it opens to view: you can turn it, inspect it and switch its poses, and changing it is part of the Gold plan.
- Open an example inside the Designer does the same without leaving it: File > Open an example, or the tile on an empty design, shows each showcase with its picture, and Open adds its documents to the design you have open, asking first when that design already holds documents.
- Download gives you its design documents, a small file anyone can keep. It opens in the Designer with File > Import design documents (its documents join the project you have open, so start from a new project to keep them apart), where every part is built in your browser first. The documents are plain JSON, so they also build in code with the free packages and serve an agent as an example: Design documents explains the format.
Catamaran

A luxury power catamaran, from its hull lines to its last cleat, that changes with two numbers. An AI coding agent wrote its design documents, and each round was reviewed and steered in the Designer.
- 61 documents: 50 parts and 11 assemblies, with 3,011 features and 60 components at the top level.
- 25 configurations: five lengths from 15 to 25 metres, each in five beams from Slim to Grand, all from the parameters
loaandbeam. Things people touch keep their size, and the rest follows the length: 24 guests seated on the smallest boat, 60 on the largest, with cabins in the hulls from the 17.5 m Sport up. - Options as parameters: a flybridge with a hardtop, an open flybridge or a coupe, three helm styles and a tender, switched by expressions on 197 components.
- Parts that move: one parameter lowers the hydraulic swim platform, with everything on it, and another slides the saloon doors.
- Fixings and structure: ISO 4017 hex bolts replicated onto the fins' flanges, ring frames, tanks, and a bridgedeck built as a box girder.


All 25 sizes at one scale:

Robot arm

A six-axis industrial arm on a pedestal, with cable harnesses along its links and a three-finger gripper.
- 28 documents: 26 parts and 2 assemblies, with 77 components that place 39 different parts.
- Joints with limits at every axis and finger, posed by four configurations: Rest, Reach, Strike and Grasp.
- Parameters that drive the pose, each with a slider, so the arm can be moved by hand as well as by configuration.
Jet engine

A turbofan: the fan, the compressor and turbine stages, the casing halves, the pipes and boxes outside them, on a stand.
- 30 documents: 12 parts and 18 assemblies, with 4,853 parts placed from 130 different ones.
- Patterned components: each blade and vane row is one component repeated around the axis, 89 patterns in all.
- Three configurations: Closed, Open, with the casing's upper half lifted, and Exploded.
Imported from its file, a model this size takes a while to open, since each different part is built once in your browser and its copies are drawn from it; opened from its link, it arrives built.
Download the jet engine's design documents (2.5 MB)Single-cylinder engine

A small air-cooled engine: a crankcase and a finned cylinder, the piston on its connecting rod and crankshaft, the valves and their cam, a flywheel, a carburettor and an exhaust.
- 44 documents: 43 parts and one assembly, with 88 components that place 54 different parts.
- Machined shafts: keyways for the flywheel and the timing gear, ring grooves for the piston pin's clips and a knurled grip, made by the Mechanical features.
- Standard parts from the library: socket head cap screws, ball bearings, a parallel key and retaining rings.
- Four configurations, one for each stroke, Intake, Compression, Power and Exhaust, and a crank parameter that turns the whole engine with its valves, clash-free through two full turns.
Desk arm

The desk arm that the tutorial builds step by step: a revolved base, a shoulder, two links from one document, a wrist and a gripper whose two jaws slide in its rails.
- 9 documents: 8 parts, two of them from the standard parts library, and one assembly, with 26 components that place 14 different parts.
- Joints: the turntable turns, the links and the wrist swing within limits, and the jaws slide, clash-free across every limit.
- Fasteners from the library: a socket head cap screw and a nut through each pivot, and the same screws fastened into every hole set, their heads sunk in the counterbores the holes' size gives.
Verified against the product in November 2026